Fall 2026

ELMT 2333-11

Industrial Electronics

Course Information

Department
BAIT
Instructor
Bohn, George
Description
Devices, circuits, and systems primarily used in automated manufacturing and/or process control including computer controls and interfacing between mechanical, electrical, electronic, and computer equipment. Includes presentation of programming schemes.
Last Updated
Saturday, September 5, 2026 9:01 AM
Course Syllabus
Published Structured Syllabus

ELMT 2333-11

Industrial Electronics
Term
Fall 2026
Instructor
Bohn, George
Department
BAIT
Meeting Pattern
12:00 PM - 02:00 PM · UITC 105

Instructor Information

Instructor: George Bohn


Email: bohngw@lamarpa.edu


Phone: 409-984-6391


Office Location and Hours:

Umphrey Industrial Technology Center - Room: 201C Office Hours: M 8 - 9 am, 3:30 - 5 pm, T - 3 - 5 pm, W 8 - 9 am, 10:30 - 12 am, R 9:30 - 11 am, 12 - 2 pm, & 4 - 5.



Additional Contact Information:

Course Description

Devices, circuits, and systems primarily used in automated manufacturing and/or process control including computer controls and interfacing between mechanical, electrical, electronic, and computer equipment.

Includes presentation of programming schemes

Required Textbook & Materials

Schoolcraft: Electricity and Electronics - Electrical Systems Series 721.1

Textbook Purchasing Statement

Textbook Purchasing Statement: A student attending Lamar State College Port Arthur is not under any obligation to purchase a textbook from the college-affiliated bookstore. The same textbook may also be available from an independent retailer, including an online retailer.

Additional Materials/Resources

None

Pre-requisites/Co-requisites

CETT 1409, CETT 1315, CETT 1321

Learning Outcomes

Describe how electronic input and output circuits are used to control automated manufacturing and/or process systems; identify basic elements used for input, output, timing, and control; define how programmable electronic systems use input data to alter output responses; and troubleshoot a representative system

Program Student Learning Outcomes

•Identify control panel indicators, calibration tools, electrical parts, and how they work. •Utilize a multimeter and oscilloscope to differentiate between two AC signals with respect to voltage, current, and power. •Apply electronic circuit fabrication techniques to industry standards. •Explain the static and dynamic aspects of processes. •Analyze level and gas measurements to determine proper operating parameters of specific process and electrical equipment. •Demonstrates standard safety procedures as required in industry.


Lecture Topics Outline

ELMT 2333 - "Industrial Electronics" Introduction to class Introduction to Electricity Static Electricity Current Electricity Magnetism Current, Resistance, and Potential Difference Electrical Components Conductors DC Circuits AC Circuits

 

 

 


Major Assignments Schedule

 

 

 

 

 

 

 

ELMT 2333 - "Industrial Electronics" Fall 2025 - Instructor Bohn – Tentative Schedule Week 1 Introduction Chapter 1 Lecture Week 2 Chapter 1 questions due Chapter 1 Test Week 3 September 7 – Labor Day Holiday Ch. 2 Lecture Week 4 Chapter 2 questions due Chapter 2 Test Week 5 Ch. 3 Lecture Writing Assignment Chapter 3 questions due Week 6 Chapter 3 Test Ch. 4 Lecture Week 7 Chapter 4 questions due Ch. 4 Test Week 8 Ch. 5 Lecture Chapter 5 questions due Week 9 Chapter 5 Test Ch. 6 Lecture Week 10 Chapter 6 questions due Chapter 6 Test Week 11 Chapter 7 Lecture Chapter 7 questions due Week 12 Chapter 7 Test Chapter 8/9 Lecture Week 13 Chapter 8/9 questions due Chapter 8/9 Test Week 14 Make-up Day November 25 - Energy Conservation Day - No Classes November 26 - 27 Thanksgiving Holiday Week 15 Course Review Final Review Week 16 Final Exam December 4 - 7



 


Final Exam Date

No Lab Final.

Grading Scale

90 - 100=A  80 - 89=B  70 - 79=C   60 - 69=D   Below 59 = F


Determination of Final Grade

Attendance and participation.


Instructor Policies

CELL PHONE POLICY - Please put cell phones out of sight and on mute during all class times. Using cell phones during class times is distracting to other students, if you must take a call or make a call, please go into hallway to do so. If there are repeated violations you will be dismissed from class for that day and counted as absent.

Attendance Policy

As class attendance is crucial to making a passing grade, after 5, 7, & 9 class periods have been missed a letter grade will be dropped after each and after 11 missed class days a Failure will be recorded for the overall grade. After 6 minutes into each class period you will be counted tardy, unless there is a recognized excuse. Sleeping in class will be discussed after class with me. Class absences can also have recognized excuses, with each being handled on a one on one basis with the instructor.

Additional Information

Course: ELMT 2333 Chemical/Refining Process Technician Skill Standards Recognized by Texas Still Standards Board (TSSB) Key Activities Numbers 1.8, 1.10, 2.8, 2.10, 3.8, 3.10, 4.10, 5.2, 5.3, 5.4, 5.7, 5.8, 5.9, 5.10
   


MyLSCPA

Be sure to check your campus email and Course Homepage using MyLSCPA campus web portal. You can also access your grades, transcripts, academic advisors, degree progress, and other services through MyLSCPA.

Academic Honesty

Academic honesty is expected from all students, and dishonesty in any form will not be tolerated. Please consult the LSCPA policies (Academic Dishonesty section in the Student Handbook) for consequences of academic dishonesty.

ADA Considerations

The Americans with Disabilities Act (ADA) is a federal anti-discrimination statute that provides comprehensive civil rights for persons with disabilities. Among other things, this legislation requires that all students with disabilities be guaranteed a learning environment that provides for reasonable accommodation of their disabilities. If you believe you have a disability requiring an accommodation, please contact the Accessibility Services Coordinator, Room 119, in the Ruby Fuller Building. The phone number is (409) 984-6241.

Facility Policies

No food or tobacco products are allowed in the classroom. Only students enrolled in the course are allowed in the classroom, except by special instructor permission. Use of electronic devices is prohibited.

HB 2504

This syllabus is part of LSCPA's efforts to comply with Texas House Bill 2504.

Mandatory Reporting of Child Abuse and Neglect

As per Texas law and LSCPA policy, all LSCPA employees, including faculty, are required to report allegations or disclosures of child abuse or neglect to the designated authorities, which may include a local or state law enforcement agency or the Texas Department of Family Protective Services. For more information about mandatory reporting requirements, see LSCPA's Policy and Procedure Manual.

Title IX and Sexual Misconduct

LSCPA is committed to establishing and maintaining an environment that is free from all forms of sex discrimination, including sexual harassment, sexual violence, and other forms of sexual misconduct. All LSCPA employees, including faculty, have the responsibility to report disclosures of sexual misconduct, including sexual harassment, sexual assault (including rape and acquaintance rape), domestic violence, dating violence, relationship violence, or stalking, to LSCPA's Title IX Coordinator, whose role is to coordinate the college's response to sexual misconduct. For more information about Title IX protections, faculty reporting responsibilities, options for confidential reporting, and the resources available for support visit LSCPA's Title IX website.

Grievance / Complaint / Concern

If you have a grievance, complaint, or concern about this course that has not been resolved through discussion with the Instructor, please consult the Department Chair.