Course Syllabus

Syllabus ID: syllabus-9f8f288a5a7c

Course Syllabus
Structured Public Version

INTC 1343-1

Application of Industrial Automatic Controls
Instructor
Bohn, George
Term
Fall 2026
Department
BAIT
Workflow Status
Published

Instructor Information

Instructor: George Bohn

Email: bohngw@lamarpa.edu

Phone: 409-984-6391

Office: Umphrey Industrial Technology Center - Room: 201C

Office Hours: Office Hours: M 8 - 9 am, 3:30 - 5 pm, T - 3 - 5 pm, W 8 - 9 am, 10:30 - 12 am, R 9:30 - 11 am, 12 - 2 pm,

& 4 - 5.

Additional Contact Information:

Course Description

Automatic process control including measuring devices, analog and digital instrumentation, signal transmitters, recorders, alarms, controllers, control valves, and process and instrument diagrams. Includes loop connection and troubleshooting.

Required Textbook & Materials

None

Textbook Purchasing Statement

Textbook Purchasing Statement: A student attending Lamar State College Port Arthur is not under any obligation to purchase a textbook from the college-affiliated bookstore. The same textbook may also be available from an independent retailer, including an online retailer.

Additional Materials/Resources

None

Pre-requisites/Co-requisites

INTC 1341

Learning Outcomes

Explain pneumatic and electronic controls; connect and troubleshoot control loops; and draw process and instrument diagrams, wiring diagrams, and block diagrams.

Program Student Learning Outcomes

•Identify control panel indicators, calibration tools, electrical parts, and how they work. •Utilize a multimeter and oscilloscope to differentiate between two AC signals with respect to voltage, current, and power. •Apply electronic circuit fabrication techniques to industry standards. •Explain the static and dynamic aspects of processes. •Analyze level and gas measurements to determine proper operating parameters of specific process and electrical equipment. •Demonstrates standard safety procedures as required in industry.

Lecture Topics Outline

INTC 1343 FALL 2026 – Lecture Topics Introduction to the Class Pressure Head Instruments Solid Level Measurement Other Level Measurement Instruments Properties of Fluid Flow Primary Flow Measuring Devices Secondary Flow Measuring Devices Variable-Area Instruments Positive-Displacement Meters Turbine and Magnetic Flowmeters Introduction to Controllers Controller Operation Controller Modes and Tuning Final Control Elements in Process Control Control Valves Electric Actuators
 

Major Assignments Schedule

INTC 1343 FALL 2026 – Tentative Schedule Instructor Bohn: "Application of industrial automatic control"

Week 1 Introduction to the Class Chapter 17 Lecture

Week 2 September 7 - Labor Day Holiday Chapter 17 questions due - Review Chapter 17 level formula practice

Week 3 Chapter 17 Test Chapter 18 Lecture

Week 4 Chapter 18 questions due - Review Chapter 18 Test

Week 5 Chapter 19 Lecture Chapter 19 questions due - Review Writing Assignment

Week 6 Chapter 19 Test Intro Chapter 20 & 21

Week 7 Chapter 20 & 21questions due - Review Chapter 20 & 21 Test

Week 8 Chapter 22 & 23 Lecture Chapter 22 & 23 questions due - Review

Week 9 Chapter 22 & 23 Test Chapter 24 & 25 Lecture

Week 10 Chapter 24 & 25 questions - Review Chapter 24 & 25 Test

Week 11 Chapter 26 & 27 Lecture Chapter 26 & 27 questions - Review

Week 12 Chapter 26 & 27 Test Chapter 28, 29, 30 & 31 Lecture

Week 13 Chapter 28, 29, 30 & 31 questions due - Review Chapter 28, 29, 30 & 31 Test

Week 14 Make- up work November 26 - Energy Conservation Day - No Classes November 26 - 27 HOLIDAY

Week 15 Final Review

Week 16 December 4 - 7 Final Exam

Final Exam Date

December 4, 2026 - 5:00 PM Through December 7, 2026 - 5:00 PM

Grading Scale

90 - 100=A 80 - 89=B  70 - 79=C 60 - 69=D  Below 59 = F

Determination of Final Grade

There will be chapter exams, a comprehensive final exam, a combined lab quiz and homework grade. Home work must be completed when due. All late homework not turned in on time will be counted as a zero. It is your responsibility to keep up with your assignments and homework. The course grade will be based on the following percentages: Homework 30%, Chapter Tests 30%, and Final 40%. Failure to take the Final Exam will result in an automatic F in this class.

Instructor Policies

CELL PHONE POLICY - Please put cell phones out of sight and on mute during all class times. Using cell phones during class times is distracting to other students, if you must take a call or make a call, please go into hallway to do so. If there are repeated violations you will be dismissed from class for that day and counted as absent.

Attendance Policy

As class attendance is crucial to making a passing grade, after 5, 7, & 9 class periods have been missed a letter grade will be dropped after each and after 11 missed class days a Failure will be recorded for the overall grade. If you are late to class, you will be counted tardy unless you have a recognized excuse. I will need to meet with you after class if you are sleeping in class to discuss the importance of not sleeping in class. Class absences can also have recognized excuses, with each being handled on a one on one basis with the instructor.

Additional Information

TimelyCare is a virtual health and well-being platform available 24/7 for Lamar State College Port Arthur students. Any enrolled student can use TimelyCare. There is no cost to students. Go to timelycare.com/LSCPA or download the TimelyCare app to access care. Course: INTC 1343 Chemical/Refining Process Technician Skill Standards Recognized by Texas Still Standards Board (TSSB) Key Activities Numbers: 1.1, 1.2, 1.3, 1.7, 2.1, 2.2, 2.3, 2.9, 3.7, 4.1, 4.2, 4.3, 4.4, 4.5, 4.7, 5.5 Institutional Policies

MyLSCPA

Be sure to check your campus email and Course Homepage using MyLSCPA campus web portal. You can also access your grades, transcripts, academic advisors, degree progress, and other services through MyLSCPA.

Academic Honesty

Academic honesty is expected from all students, and dishonesty in any form will not be tolerated. Please consult the LSCPA policies (Academic Dishonesty section in the Student Handbook) for consequences of academic dishonesty.

ADA Considerations

The Americans with Disabilities Act (ADA) is a federal anti-discrimination statute that provides comprehensive civil rights for persons with disabilities. Among other things, this legislation requires that all students with disabilities be guaranteed a learning environment that provides for reasonable accommodation of their disabilities. If you believe you have a disability requiring an accommodation, please contact the Accessibility Services Coordinator, Room 119, in the Ruby Fuller Building. The phone number is (409) 984-6241.

Facility Policies

No food or tobacco products are allowed in the classroom. Only students enrolled in the course are allowed in the classroom, except by special instructor permission. Use of electronic devices is prohibited.

HB 2504

This syllabus is part of LSCPA's efforts to comply with Texas House Bill 2504.

Mandatory Reporting of Child Abuse and Neglect

As per Texas law and LSCPA policy, all LSCPA employees, including faculty, are required to report allegations or disclosures of child abuse or neglect to the designated authorities, which may include a local or state law enforcement agency or the Texas Department of Family Protective Services. For more information about mandatory reporting requirements, see LSCPA's Policy and Procedure Manual.

Title IX and Sexual Misconduct

LSCPA is committed to establishing and maintaining an environment that is free from all forms of sex discrimination, including sexual harassment, sexual violence, and other forms of sexual misconduct. All LSCPA employees, including faculty, have the responsibility to report disclosures of sexual misconduct, including sexual harassment, sexual assault (including rape and acquaintance rape), domestic violence, dating violence, relationship violence, or stalking, to LSCPA's Title IX Coordinator, whose role is to coordinate the college's response to sexual misconduct. For more information about Title IX protections, faculty reporting responsibilities, options for confidential reporting, and the resources available for support visit LSCPA's Title IX website.

Clery Act Crime Reporting

For more information about the Clery Act and crime reporting, see the Annual Security & Fire Safety Report and the Campus Security website.

Grievance / Complaint / Concern

If you have a grievance, complaint, or concern about this course that has not been resolved through discussion with the Instructor, please consult the Department Chair.

Department Information

Department Information: Business and Industrial Technology

Chair: Cristina Lawson

Email: lawsonac@lamarpa.edu Phone: (409) 984-6381